Image
Pages

Irving, TX

Machined Parts Irving, TX | Irving, TX CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Irving, TX

Machined Parts Irving, TX. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere around you in Irving, TX. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than simply things manufactured using our machinery. They are parts fabricated using our cutting machines, like our CNC lathes and mills. Machined parts can be plastic, metal, or perhaps some other materials on occasion, but they must be made from a workpiece that can be cut without majorly altering its form. Machined parts come from a tried-and-tested manufacturing method that we have utilized as an industry standard for decades. Regardless of your Irving, TX company’s industry, or in which component your machined parts are being employed, they meet all industry-specific standards and certifications. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to receive the custom machined parts you need precisely when you need them in Irving, TX. Give us a call right away at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My Irving, TX Company?

Machined parts can be made from a variety of materials, including metals and plastics. Yet, some materials are easier to machine than others. Exceptionally hard materials are difficult to puncture with a cutting tool, perhaps causing the tool to vibrate more, thus likely reducing quality. Extremely soft materials, as well as materials with a low melting point, may warp upon contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we are available to a conversation involving machining parts with other materials. Just give us a call at 573-646-3996 or contact us online.

What Are the Best Ways For My Irving, TX Company to Use Machined Parts?

Machined parts are utilized in virtually all kinds of businesses, throughout every industry – from medical devices to consumer goods. Some typical machined parts used in a variety of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Irving, TX company is planning a project using machined parts, give Roberson Machine Company a call at 573-646-3996 or take advantage of our online quote tool.

In addition to our machined parts for your company in Irving, TX, Roberson Machine Company provides the following for our Irving, TX partners:

Machined Parts Irving, TX | CNC Machined Parts and Services Near Irving, TX | Roberson Machine Company

What Are the Advantages of Machined Parts in Irving, TX?

Machined parts from Roberson Machine Company provide certain benefits that may not be possible with injection molded parts or even 3D printed parts in Irving, TX. Some of the key advantages for your Irving, TX company include:

Quality

Machined parts can be cut to a very high caliber, based primarily on your Irving, TX company’s tolerances and specifications. This means our CNC machinists can take a little extra time on tight-tolerance pieces and individual aspects to guarantee the finest quality.

Lead Times

Machined parts can be produced quicker than parts made via other production production like Irving, TX molding. This is mostly because of to the lack of labor-intensive tooling, therefore having the ability to bank more on the CAD and CAM software our machinists input into the CNC machines. But our manufacturing procedure itself is also highly effective and efficient – some of our CNC machines have rapid rates of nearly 45 yards per minute, although we don’t produce machined parts at those speeds. The speed of our CNC machines, along with the one-step nature of machining combine to make machined parts some of the fastest to manufacture, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is because CNC machines aren’t subjected to the same limitations of molding, like thin walls and tapering. Machined parts can be thick and robust, yet their features can be intricate and complex. Despite machined parts having some limitations when it comes to, for example, deep channels and internal sections, machining remains the most geometrically flexible production procedure for your Irving, TX production run.

Alterations

Due to the fact that CNC machined parts are made from digital CAD files, it’s possible to make alterations throughout the machining process, right up until the final moment. This is extremely favorable during prototyping and our research and experimental development phases, when your staff or our engineers might look to make slight, fractional changes or clarifications to the machined part or create numerous versions. It also reduces the possibility of waste, as erroneous parts are far less likely to come about.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have usually been extruded or cast. This makes them foundationally solid in comparison to, for example, 3D printed pieces, which can be predominantly weaker along one axis, where one layer is built on top of the next.

Surface Finish

While molding parts deals with surface quality issues such as flow lines, jetting, and flash at the parting line, machined parts entirely avoid them. With a moderate amount of post-processing, which is accomplished in our value-added services, machined parts can be brought to a high standard regarding surface finish. Machining also gives a superior surface finish to 3D printing, even prior to any secondary service has been started by our machinists. 3D printing leaves noticeable layer lines on the surface of the part, which must be smoothed over by chemical treatment or sanding. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts due to the fact that they are cut directly from a blank workpiece. For molded parts, it is necessary to fabricate metal tooling – a procedure that seems endless and can be expensive. But machining with Roberson Machine Company is unique in offering high-quality parts with no MOQ, making it convenient for smaller companies in Irving, TX, small production runs, and prototyping.

Call us today for more information regarding machined parts and our CNC capabilities for your Irving, TX project at 573-646-3996 or reach out to us online.

Machined Parts Irving, TX | CNC Machined Parts Near You in Irving, TX | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Irving, TX?

The Roberson Machine Company facility is fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting to remove materials from a workpiece, but our CNC mills combine the cutting procedure with advanced computer control to permit rapid and accurate production. Our horizontal CNC mills quickly and accurately cut your component material to the tightest of tolerances. Our CNC horizontal milling services revolve around modern 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are set at 90 degrees to the floor, making them ideal for projects requiring large production runs of fairly intricate parts. While horizontal mills are more beneficial in complicated milling jobs, vertical mills are adept in an array of designs for your company’s work plan in Irving, TX.

  • CNC Horizontal Lathes
  • In contrast to mills, which rely on rotation of the cutting tool, lathes instead spin the workpiece as material is cut. In comparison to manual lathes, which require a degree of expertise to operate, CNC lathes drastically diminish the probability of human error, as well as the amount of labor. These advantages translate into marked decreases in cost and error rates for your Irving, TX company.

Reach Out to the Leader in Custom Machined Parts For Your Irving, TX Company | Roberson Machine Company

From prototypes to production, and each process in between, Roberson Machine Company optimizes your entire Irving, TX production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership team, along with our skilled and experienced machinists are all-in in supporting you, your work plan, and your success in Irving, TX.

Call us now to learn more about our machined parts manufacturing and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema