Image
Pages

Tucson, AZ

Machined Parts Tucson, AZ | Tucson, AZ CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Tucson, AZ

Machined Parts Tucson, AZ. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere around you in Tucson, AZ. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than just objects built utilizing our machinery. They are parts fabricated using our cutting machines, such as our CNC mills and lathes. Machined parts can be plastic, metal, or perhaps some other materials on occasion, but they have to come from a workpiece that can be cut without excessively altering its form. Machined parts come from a tried-and-tested manufacturing method that we have utilized as an industry standard for decades. No matter your Tucson, AZ company’s industry, or in which piece of equipment your machined parts are being employed, they meet all industry-specific certifications and standards. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to receive the custom machined parts you need precisely when you need them in Tucson, AZ. Give us a call right away at 573-646-3996 or contact us online.

What Materials Can Be Used For Machined Parts For My Tucson, AZ Company?

Machined parts can be made from a variety of materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are difficult to penetrate with a cutting tool and may cause the tool to shake or vibrate more, thus possibly reducing quality. Extremely soft materials, and materials with a low melting point, may warp upon contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we’d be open to a conversation involving machining parts with other materials. Just call us at 573-646-3996 or reach out to us online.

What Are the Applications of Machined Parts For My Company in Tucson, AZ?

Machined parts are used in essentially all types of companies, throughout every industry – from consumer goods to medical devices. Some typical machined parts used in a multitude of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Tucson, AZ company is planning a project using machined parts, call Roberson Machine Company at 573-646-3996 or fill out our online quote tool.

In addition to our machined parts for your business in Tucson, AZ, Roberson Machine Company provides the following for our Tucson, AZ clients:

Machined Parts Tucson, AZ | CNC Machined Parts and Services Near Tucson, AZ | Roberson Machine Company

What Are the Benefits of Machined Parts in Tucson, AZ?

Machined parts from Roberson Machine Company offer particular benefits that might not be possible with injection molded parts or even 3D printed parts in Tucson, AZ. Some of the principal advantages in Tucson, AZ include:

Quality

Machined parts can be built to an exceptionally high standard, based entirely on your Tucson, AZ company’s specifications and tolerances. This means our CNC machinists can take a little extra time on tight-tolerance pieces and individual features to guarantee the finest quality.

Lead Times

Machined parts can be manufactured faster than parts made via other production production like Tucson, AZ molding. This is mostly because of to the lack of labor-intensive tooling, therefore having the ability to bank more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing procedure itself is also highly efficient – some of our CNC machines have rapid rates of nearly 45 yards per minute, even though we don’t produce machined parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to produce, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is due to the fact that CNC machines are not subjected to the same restrictions of molding, like tapering and thin walls. Machined parts can be thick and robust, yet their features can be fine and complex. Although machined parts have some restrictions when it comes to, for example, internal sections and deep channels, machining still represents the most geometrically flexible manufacturing procedure for your Tucson, AZ production run.

Alterations

Because CNC machined parts are manufactured from digital CAD files, it’s possible to make alterations throughout the machining procedure, up until the final moment. This is extremely favorable during our research and experimental development and prototyping stages, when your team or our engineers might want to make fractional adjustments or clarifications to the machined part or develop numerous versions. It also lessens the possibility of waste, as erroneous parts are far less likely to come about.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have typically been cast or extruded. This makes them foundationally solid in comparison to, for example, 3D printed parts, which can be much flimsier along one axis, where one layer is added atop the next.

Surface Finish

While molding parts deals with surface quality issues such as flow lines, jetting, and flash at the parting line, machined parts entirely avoid them. With a small amount of post-processing, which is attained in our value-added services, machined parts can be brought to an extremely high level in terms of surface finish. Machining also gives a better surface finish to 3D printing, even prior to any secondary service has been started by our machinists. 3D printing can leave visible layer lines on the surface of the part, which must be smoothed over through chemical treatment or sanding. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts due to the fact that they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a process that seems endless and can be costly. But machining with Roberson Machine Company is unique in providing top-quality parts with no MOQ, making it a good option for smaller companies in Tucson, AZ, small production runs, and prototyping.

Call us today for more information regarding machined parts and our CNC capabilities for your Tucson, AZ work plan at 573-646-3996 or contact us online.

Machined Parts Tucson, AZ | CNC Machined Parts Near You in Tucson, AZ | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Tucson, AZ?

The Roberson Machine Company facilities are fully stocked with high-end CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to permit rapid and accurate production. Our horizontal CNC mills accurately and quickly shape your component material to tight tolerances. Our CNC horizontal milling services benefit from the availability of our state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them ideal for projects calling for large production runs of moderately intricate parts. Although horizontal mills are more beneficial in difficult milling jobs, vertical mills are adept in a wide variety of designs for your business’s project in Tucson, AZ.

  • CNC Horizontal Lathes
  • As opposed to mills, which bank on spinning of the cutting tool, lathes instead rotate the workpiece as material is removed. In comparison to manual lathes, which require a degree of expertise to operate, CNC lathes drastically lessen the probability of human error, as well as the amount of labor. These advantages translate into decreases in cost and defect rates for your Tucson, AZ company.

Reach Out to a Leader in Custom Machined Parts For Your Company in Tucson, AZ | Roberson Machine Company

From production to prototypes, and each step in between, Roberson Machine Company optimizes your entire Tucson, AZ production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything regarding CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are passionate about supporting you, your work plan, and doing whatever it takes for you to succeed in Tucson, AZ.

Give us a call now for more information regarding our machined parts manufacturing and services at 573-646-3996 or contact us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema