Image
Pages

Greensboro, NC

Machined Parts Greensboro, NC | Greensboro, NC CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Greensboro, NC

Machined Parts Greensboro, NC. Machined parts are everywhere around you in Greensboro, NC. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than just objects built utilizing our machinery. They are parts fabricated using our cutting machines, such as our CNC mills and lathes. Machined parts can be metal, plastic, or even some other materials on occasion, but they have to come from a workpiece that can be cut without drastically altering its form. Machined parts come from a tried-and-tested manufacturing method that we have used as an industry standard for decades. Regardless of your Greensboro, NC company’s industry, or in which component your machined parts are being utilized, they meet all industry-specific standards and certifications. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to receive the custom machined parts you need precisely when you need them in Greensboro, NC. Call us now at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My Greensboro, NC Company?

Machined parts can be made from many different materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are especially difficult to puncture with a cutting tool and may cause the tool to shake or vibrate more, thus likely reducing quality. Exceptionally soft materials, and materials with a low melting point, may become damaged upon contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we’d be open to a conversation involving machining parts with other materials. Just call us at 573-646-3996 or contact us online.

What Are the Best Ways For My Greensboro, NC Company to Use Machined Parts?

Machined parts are utilized in virtually all kinds of companies, throughout every industry – from consumer goods to medical devices. Some common machined parts used in a variety of industries are:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Greensboro, NC company is planning a production run of machined parts, call Roberson Machine Company at 573-646-3996 or use our online quote tool.

In addition to our machined parts for your business in Greensboro, NC, Roberson Machine Company provides the following for our Greensboro, NC partners:

Machined Parts Greensboro, NC | CNC Machined Parts and Services Near Greensboro, NC | Roberson Machine Company

What Are the Benefits of Machined Parts in Greensboro, NC?

Machined parts from Roberson Machine Company provide certain advantages that might not be possible with injection molded parts or even 3D printed parts in Greensboro, NC. Some of the principal advantages for your Greensboro, NC company include:

Quality

Machined parts can be built to a very high standard, based primarily on your Greensboro, NC company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance parts and individual features to ensure the best quality.

Lead Times

Machined parts can be produced quicker than parts made via other manufacturing processes like Greensboro, NC molding. This is mostly because of to the lack of labor-intensive tooling, being able to bank more on the CAD and CAM software our machinists use with the CNC machines. But our manufacturing procedure itself is also highly effective and efficient – several of our CNC machines have rapid rates of up to 45 yards per minute, although we do not manufacture machined parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to fabricate, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide variety of shapes and sizes. This is because CNC machines aren’t subjected to the same constraints of molding, like tapering and thin walls. Machined parts can be robust and thick, yet their features can be intricate and complex. Despite machined parts having some limitations when it comes to, for example, internal sections and deep channels, machining remains the most geometrically flexible production procedure for your Greensboro, NC production run.

Alterations

Due to the fact that CNC machined parts are manufactured from digital CAD files, it’s possible to make changes throughout the machining procedure, right up until the final moment. This is extremely favorable throughout our research and experimental development and prototyping stages, when our engineers or your team may look to make slight, fractional adjustments or clarifications to the machined part or develop numerous versions. It also reduces the likelihood of waste, as defective parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have typically been extruded or cast. This makes them foundationally strong compared to, say, for example, 3D printed pieces, which can be much flimsier along one axis, where one layer is built atop the next.

Surface Finish

Machined parts completely avoid the surface quality issues associated with molding like flow lines, jetting, and flash at the parting line. With a moderate amount of post-processing, which is achieved in our value-added services, machined parts can be brought to a high level regarding surface finish. Machining also gives a better surface finish to 3D printing, even before any secondary service has been started by our machinists. 3D printing can leave visible layer lines on the surface of the part, which then must be smoothed over by sanding or chemical treatment. Machined parts don’t produce these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts because they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a procedure that seems endless and can be expensive. However, machining with Roberson Machine Company is unique in providing high-quality parts with no MOQ, making it convenient for smaller companies in Greensboro, NC, small production runs, and prototyping.

Give us a call today for more information regarding machined parts and our CNC capabilities for your Greensboro, NC work plan at 573-646-3996 or reach out to us online.

Machined Parts Greensboro, NC | CNC Machined Parts Near You in Greensboro, NC | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Greensboro, NC?

The Roberson Machine Company facility is fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting to remove materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to allow for accurate and rapid production. Our horizontal CNC mills accurately and quickly cut your component material to the tightest of tolerances. Our CNC horizontal milling services benefit from the availability of our state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them ideal for jobs requiring large production runs of fairly intricate parts. While horizontal mills are more beneficial in difficult milling projects, vertical mills are capable of a wide variety of designs for your company’s project in Greensboro, NC.

  • CNC Horizontal Lathes
  • In contrast to mills, which rely on spinning of the cutting tool, lathes instead spin the workpiece as material is cut. Compared to manual lathes, which require a degree of expertise to operate, CNC lathes drastically diminish the amount of labor and the probability of human error. These benefits translate into decreases in cost and defect rates for your Greensboro, NC company.

Connect With the Leader in Custom Machined Parts For Your Company in Greensboro, NC | Roberson Machine Company

From production to prototypes, and every step in between, Roberson Machine Company optimizes your entire Greensboro, NC production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything regarding CNC machined parts. Our dedicated leadership team, along with our talented and experienced machinists are passionate about supporting you, your project, and doing whatever it takes for you to succeed in Greensboro, NC.

Give us a call now for more information regarding our machined parts manufacturing and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema