Image
Pages

Colorado Springs, CO

Machined Parts Colorado Springs, CO | Colorado Springs, CO CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Colorado Springs, CO

Machined Parts Colorado Springs, CO. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere around you in Colorado Springs, CO. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than simply objects manufactured utilizing our machinery. They are parts constructed using our cutting machines, such as our CNC mills and lathes. Machined parts can be metal, plastic, or occasionally perhaps some other materials, but they have to be made from a material that can be cut without majorly deforming. Machined parts come from a tried-and-tested manufacturing technique that we have used as an industry standard for decades. No matter your Colorado Springs, CO company’s industry, or in which piece of equipment your machined parts are being utilized, they meet all industry-specific certifications and standards. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to get the custom machined parts you need in Colorado Springs, CO. Call us today at 573-646-3996 or contact us online.

What Materials Can Be Used For Machined Parts For My Colorado Springs, CO Company?

Machined parts can be made from a variety of materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are especially difficult to puncture with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely reducing quality. Exceptionally soft materials, as well as materials with a low melting point, may become damaged once coming into contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we’d be open to discussing the possibility of machining parts with other materials. Just call us at 573-646-3996 or contact us online.

What Are the Applications of Machined Parts For My Company in Colorado Springs, CO?

Machined parts are used in virtually all kinds of companies, throughout every industry – from consumer goods to medical devices. Some typical machined parts used in a variety of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Colorado Springs, CO company is scoping out a production run of machined parts, call Roberson Machine Company at 573-646-3996 or use our online quote tool.

Along with our machined parts for your business in Colorado Springs, CO, Roberson Machine Company offers the following to our Colorado Springs, CO clients:

Machined Parts Colorado Springs, CO | CNC Machined Parts and Services Near Colorado Springs, CO | Roberson Machine Company

What Are the Benefits of Machined Parts in Colorado Springs, CO?

Machined parts from Roberson Machine Company offer particular benefits that may not be possible with injection molded parts or even 3D printed parts in Colorado Springs, CO. Some of the pivotal advantages for your Colorado Springs, CO company include:

Quality

Machined parts can be cut to an exceptionally high quality, based entirely on your Colorado Springs, CO company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance workpieces and individual aspects to guarantee the best quality.

Lead Times

Machined parts can be produced faster than pieces made via other production processes like Colorado Springs, CO molding. This is mostly due to the lack of labor-intensive tooling, therefore having the ability to bank more on the CAD and CAM software our machinists input into the CNC machines. But the manufacturing procedure itself is also highly efficient – some of our CNC machines have rapid rates of nearly 45 yards per minute, even though we don’t manufacture machined parts at those speeds. The one-step nature of machining and the speed of our CNC machines combine to make machined parts some of the fastest to manufacture, reducing lead times for shorter time-to-market and practical rapid prototyping.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is due to the fact that CNC machines aren’t subjected to the same restrictions of molding, like tapering and thin walls. Machined parts can be robust and thick, yet their features can be intricate and detailed. Despite machined parts having some restrictions when it comes to, for example, deep channels and internal sections, machining still represents the most geometrically flexible manufacturing procedure for your Colorado Springs, CO production run.

Alterations

Because CNC machined parts are made from digital CAD files, it’s possible to make changes throughout the machining process, right up until the last minute. This is extremely helpful during prototyping and our research and experimental development phases, when your staff or our engineers may look to make slight, fractional adjustments or refinements to the machined part or create multiple versions. It also reduces the probability of waste, as erroneous parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been extruded or cast. This makes them foundationally solid compared to, say, for example, 3D printed pieces, which can be predominantly flimsier along one axis, where one layer is built atop the next.

Surface Finish

Machined parts entirely avoid the surface quality issues associated with molding like flow lines, jetting, and flash at the parting line. With a moderate amount of post-processing, which is achieved in our value-added services, machined parts can be brought to a high standard in terms of surface finish. Machining also provides a better surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing can leave noticeable layer lines on the surface of the part, which must be smoothed over via chemical treatment or sanding. Machined parts don’t produce these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts due to the fact that they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a procedure that seems endless and can be expensive. However, machining with Roberson Machine Company is unique in offering top-quality parts with no MOQ, making it a good option for smaller companies in Colorado Springs, CO, small production runs, and prototyping.

Give us a call today for more information regarding machined parts and our CNC capabilities for your Colorado Springs, CO project at 573-646-3996 or reach out to us online.

Machined Parts Colorado Springs, CO | CNC Machined Parts Near You in Colorado Springs, CO | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Colorado Springs, CO?

The Roberson Machine Company facilities are fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to permit rapid and precise manufacturing. Our horizontal CNC mills quickly and accurately cut your component material to the tightest of tolerances. Our CNC horizontal milling services benefit from the availability of our state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them ideal for projects needing large production runs of fairly complex parts. While horizontal mills are better suited for more complicated milling projects, vertical mills are adept in an array of designs for your company’s project in Colorado Springs, CO.

  • CNC Horizontal Lathes
  • As opposed to mills, which rely on spinning of the cutting tool, lathes instead rotate the workpiece as material is subtracted. In comparison to manual lathes, which need a degree of expertise to operate, CNC lathes drastically diminish the amount of labor and the probability of human error. These advantages translate into marked decreases in cost and error rates for your Colorado Springs, CO company.

Connect With the Leader in Custom Machined Parts For Your Colorado Springs, CO Company | Roberson Machine Company

From production to prototypes, and each step in between, Roberson Machine Company optimizes your entire Colorado Springs, CO production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are passionate about supporting you, your project, and your success in Colorado Springs, CO.

Give us a call today for more information regarding our machined parts manufacturing and services at 573-646-3996 or contact us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema