• 4416 Glaser Hollow Rd. Bland, MO 65014

Machined Parts Los Angeles, CA | Los Angeles, CA CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Los Angeles, CA

Machined Parts Los Angeles, CA. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere in Los Angeles, CA. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than just things built using our machinery. They are parts fabricated using our cutting machines, like our CNC mills and lathes. Machined parts can be metal, plastic, or occasionally even some other materials, but they must be made from a workpiece that can be cut without drastically altering its form. Machined parts come from a tried-and-tested manufacturing technique that we have utilized as an industry standard for decades. No matter your Los Angeles, CA company’s industry, or in which component your machined parts are being employed, they meet all industry-specific certifications and standards. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to receive the custom machined parts you need precisely when you need them in Los Angeles, CA. Give us a call right away at 573-646-3996 or connect with us online.

What Materials Can Be Used For Machined Parts For My Los Angeles, CA Company?

Machined parts can be made from many different materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are especially difficult to penetrate with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely diminishing quality. Extremely soft materials, and materials with a low melting point, may become damaged upon contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we are available to discussing the possibility of machining parts with other materials. Just call us at 573-646-3996 or reach out to us online.

What Are the Best Ways For My Los Angeles, CA Company to Use Machined Parts?

Machined parts are used in essentially all types of companies, throughout every industry – from medical devices to consumer goods. Some common machined parts used in a multitude of industries are:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Los Angeles, CA company is scoping out a project using machined parts, call Roberson Machine Company at 573-646-3996 or take advantage of our online request-a-quote tool.

In addition to our machined parts for your business in Los Angeles, CA, Roberson Machine Company provides the following for our Los Angeles, CA clients:

Machined Parts Los Angeles, CA | CNC Machined Parts and Services Near Los Angeles, CA | Roberson Machine Company

What Are the Advantages of Machined Parts in Los Angeles, CA?

Machined parts from Roberson Machine Company provide certain advantages that might not be possible with injection molded parts or even 3D printed parts in Los Angeles, CA. Some of the pivotal advantages for your Los Angeles, CA company are:

Quality

Machined parts can be made to a very high standard, based primarily on your Los Angeles, CA company’s specifications and tolerances. This means our CNC machinists can take a little extra time on tight-tolerance pieces and individual aspects to ensure the best quality.

Lead Times

Machined parts can be produced faster than parts made via other manufacturing production like Los Angeles, CA molding. This is mostly because of to the lack of labor-intensive tooling, therefore being able to bank more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing procedure itself is also highly effective and efficient – several of our CNC machines have rapid rates of nearly 45 yards per minute, although we do not machine parts at those speeds. The one-step nature of machining and the speed of our CNC machines combine to make machined parts some of the fastest to manufacture, reducing lead times for shorter time-to-market and practical rapid prototyping.

Design Freedom

Machined parts can have a wide variety of shapes and sizes. This is due to the fact that CNC machines are not subjected to the same limitations of molding, like thin walls and tapering. Machined parts can be robust and thick, yet their features can be fine and complex. Despite machined parts having some limitations when it comes to, for example, deep channels and internal sections, machining remains the most geometrically flexible manufacturing procedure for your Los Angeles, CA production run.

Alterations

Because CNC machined parts are made from digital CAD files, it is possible to make alterations throughout the machining process, up until the last minute. This is extremely useful throughout our research and experimental development and prototyping phases, when our engineers or your staff may look to make slight, fractional adjustments or refinements to the machined part or develop multiple versions. It also reduces the probability of waste, as defective parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have typically been cast or extruded. This makes them foundationally solid compared to, say, for example, 3D printed pieces, which can be predominantly flimsier along one axis, where one layer is built on top of the next.

Surface Finish

While molding parts deals with surface quality issues such as flow lines, jetting, and flash at the parting line, machined parts entirely circumvent them. With a moderate amount of post-processing, which is attained in our value-added services, machined parts can be brought to an extremely high standard in terms of surface finish. Machining also gives a superior surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing can leave noticeable layer lines on the surface of the part, which then must be smoothed over via chemical treatment or sanding. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cut directly from a blank workpiece, making it cost-effective and possible to order extremely small quantities or even one-off parts. It is a requirement when molding parts that you fabricate metal tooling – a process that seems endless and can be expensive. However, machining with Roberson Machine Company is unique in offering top-quality parts with no MOQ, making it suitable for smaller businesses in Los Angeles, CA, small production runs, and prototyping.

Give us a call now for more information regarding machined parts and our CNC capabilities for your Los Angeles, CA project at 573-646-3996 or contact us online.

Machined Parts Los Angeles, CA | CNC Machined Parts Near You in Los Angeles, CA | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Los Angeles, CA?

The Roberson Machine Company facilities are fully stocked with high-end CNC machinery capable of manufacturing precisely machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with cutting-edge computer control to permit rapid and accurate production. Our horizontal CNC mills accurately and quickly shape your component material to the tightest of tolerances. Our CNC horizontal milling services revolve around modern 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them optimal for projects needing large production runs of moderately intricate parts. While horizontal mills are more beneficial in difficult milling projects, vertical mills are capable of a wide variety of designs for your business’s project in Los Angeles, CA.

  • CNC Horizontal Lathes
  • As opposed to mills, which bank on rotation of the cutting tool, lathes instead spin the workpiece as material is subtracted. Compared to manual lathes, which need a degree of expertise to operate, CNC lathes drastically reduce the amount of labor and the probability of human error. These advantages translate into marked decreases in cost and error rates for your Los Angeles, CA company.

Contact the Leader in Custom Machined Parts For Your Company in Los Angeles, CA | Roberson Machine Company

From prototypes to production, and each step in between, Roberson Machine Company optimizes your whole Los Angeles, CA production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are all-in in supporting you, your work plan, and doing whatever it takes for you to succeed in Los Angeles, CA.

Give us a call today for more information regarding our machined parts manufacturing and services at 573-646-3996 or contact us online.

x