Image
Pages

Albuquerque, NM

Machined Parts Albuquerque, NM | Albuquerque, NM CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Albuquerque, NM

Machined Parts Albuquerque, NM. Machined parts are everywhere around you in Albuquerque, NM. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than simply things manufactured using our machinery. They are parts constructed using our cutting machines, such as our CNC lathes and mills. Machined parts can be plastic, metal, or occasionally even some other materials, but they have to be made from a workpiece that can be cut without majorly deforming. Machined parts come from a tried-and-tested manufacturing technique that we have utilized as an industry standard for decades. Regardless of your Albuquerque, NM company’s industry, or in which component your machined parts are being employed, they meet all industry-specific standards and certifications. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to get the custom machined parts you need in Albuquerque, NM. Call us today at 573-646-3996 or contact us online.

What Materials Can Be Used For Machined Parts For My Albuquerque, NM Company?

Machined parts can be made from many different materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are especially difficult to puncture with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely reducing quality. Exceptionally soft materials, as well as materials with a low melting point, may deform upon contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we are available to discussing the possibility of machining parts with other materials. Just give us a call at 573-646-3996 or contact us online.

What Are the Best Ways For My Albuquerque, NM Company to Use Machined Parts?

Machined parts are utilized in essentially all types of businesses, throughout every industry – from medical devices to consumer goods. Some typical machined parts used in a multitude of industries are:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Albuquerque, NM business is planning a project using machined parts, give Roberson Machine Company a call at 573-646-3996 or fill out our online quote tool.

Along with our machined parts for your company in Albuquerque, NM, Roberson Machine Company provides the following for our Albuquerque, NM clients:

Machined Parts Albuquerque, NM | CNC Machined Parts and Services Near Albuquerque, NM | Roberson Machine Company

What Are the Benefits of Using Machined Parts at My Albuquerque, NM Company?

Machined parts from Roberson Machine Company provide particular benefits that may not be possible with injection molded parts or even 3D printed parts in Albuquerque, NM. Some of the pivotal advantages in Albuquerque, NM include:

Quality

Machined parts can be made to a very high caliber, based primarily on your Albuquerque, NM company’s tolerances and specifications. This means our CNC machinists can take extra time on tight-tolerance pieces and individual aspects to ensure the best quality.

Lead Times

Machined parts can be manufactured faster than components made via other production production like Albuquerque, NM molding. This is mainly because of to the lack of labor-intensive tooling, being able to bank more on the CAD and CAM software our machinists use with the CNC machines. But our manufacturing process itself is also highly efficient – several of our CNC machines have rapid rates of nearly 45 yards per minute, although we do not machine parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to produce, reducing lead times for shorter time-to-market and practical rapid prototyping.

Design Freedom

Machined parts can have a wide range of sizes and shapes. This is because CNC machines are not subjected to the same limitations of molding, like tapering and thin walls. Machined parts can be robust and thick, yet their features can be intricate and complex. Although machined parts have some restrictions when it comes to, for example, deep channels and internal sections, machining remains the most geometrically flexible production procedure for your Albuquerque, NM production run.

Alterations

Due to the fact that CNC machined parts are manufactured from digital CAD files, it’s possible to make changes throughout the machining process, right up until the final moment. This is extremely useful during our research and experimental development and prototyping phases, when our engineers or your staff may look to make slight, fractional adjustments or clarifications to the machined part or create multiple versions. It also reduces the possibility of waste, as defective parts are far less likely to be produced.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been cast or extruded. This makes them foundationally solid compared to, say, for example, 3D printed pieces, which can be predominantly flimsier along one axis, where one layer is added on top of the next.

Surface Finish

While molding parts deals with surface quality issues like flow lines, jetting, and flash at the parting line, machined parts entirely avoid them. With a moderate amount of post-processing, which is accomplished in our value-added services, machined parts can be brought to a high level regarding surface finish. Machining also gives a superior surface finish to 3D printing, even before any secondary service has been started by our machinists. 3D printing can leave visible layer lines on the surface of the part, which then must be smoothed over by chemical treatment or sanding. Machined parts do not have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cut directly from a blank workpiece, making it cost-effective and possible to order extremely small quantities or even one-off parts. It is a requirement when molding parts that you fabricate metal tooling – a process that takes a long time and can be costly. But machining with Roberson Machine Company is unique in offering high-quality parts with no MOQ, making it suitable for smaller businesses in Albuquerque, NM, small production runs, and prototyping.

Call us today to learn more about machined parts and our CNC capabilities for your Albuquerque, NM project at 573-646-3996 or connect with us online.

Machined Parts Albuquerque, NM | CNC Machined Parts Near You in Albuquerque, NM | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Albuquerque, NM?

The Roberson Machine Company facilities are fully stocked with high-end CNC machinery capable of manufacturing accurately machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to permit accurate and rapid manufacturing. Our horizontal CNC mills accurately and quickly shape your component material to tight tolerances. Our CNC horizontal milling services revolve around state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them optimal for projects requiring large production runs of fairly intricate parts. Although horizontal mills are better suited for more complicated milling jobs, vertical mills are capable of a wide variety of designs for your business’s work plan in Albuquerque, NM.

  • CNC Horizontal Lathes
  • As opposed to mills, which rely on rotation of the cutting tool, lathes instead spin the workpiece as material is removed. In comparison to manual lathes, which need a degree of expertise to operate, CNC lathes drastically lessen the probability of human error, as well as the amount of labor. These advantages translate into decreases in cost and defect rates for your Albuquerque, NM company.

Connect With the Leader in Custom Machined Parts For Your Albuquerque, NM Company | Roberson Machine Company

From prototypes to production, and every step in between, Roberson Machine Company optimizes your whole Albuquerque, NM production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything regarding CNC machined parts. Our devoted leadership team, along with our skilled and knowledgeable machinists are passionate about supporting you, your work plan, and your success in Albuquerque, NM.

Call us today for more information regarding our machined parts production and services at 573-646-3996 or contact us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema