Image
Pages

Fort Worth, TX

Machined Parts Fort Worth, TX | Fort Worth, TX CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Fort Worth, TX

Machined Parts Fort Worth, TX. Machined parts are everywhere around you in Fort Worth, TX. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than just objects built using our machinery. They are parts constructed using our cutting machines, such as our CNC mills and lathes. Machined parts can be metal, plastic, or occasionally perhaps some other materials, but they must come from a material that can be cut without excessively deforming. Machined parts come from a tried-and-tested manufacturing method that we have used as an industry standard for decades. No matter your Fort Worth, TX company’s industry, or in which piece of equipment your machined parts are being utilized, they meet all industry-specific certifications and standards. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to get the custom machined parts you need precisely when you need them in Fort Worth, TX. Give us a call right away at 573-646-3996 or contact us online.

What Materials Can Be Used For Machined Parts For My Fort Worth, TX Company?

Machined parts can be made from a variety of materials, including metals and plastics. But, some materials are easier to machine than others. Extremely hard materials are difficult to penetrate with a cutting tool and may cause the tool to vibrate more, thus likely diminishing quality. Extremely soft materials, as well as materials with a low melting point, may become damaged once coming into contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we’d be open to discussing the possibility of machining parts with other materials. Just give us a call at 573-646-3996 or contact us online.

What Are the Applications of Machined Parts For My Company in Fort Worth, TX?

Machined parts are used in essentially all kinds of companies, throughout every industry – from medical devices to consumer goods. Some common machined parts used in a variety of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Fort Worth, TX company is scoping out a production run of machined parts, give Roberson Machine Company a call at 573-646-3996 or use our online quote tool.

In addition to our machined parts for your business in Fort Worth, TX, Roberson Machine Company provides the following for our Fort Worth, TX clients:

Machined Parts Fort Worth, TX | CNC Machined Parts and Services Near Fort Worth, TX | Roberson Machine Company

What Are the Benefits of Using Machined Parts at My Fort Worth, TX Company?

Machined parts from Roberson Machine Company offer certain advantages that might not be possible with 3D printed parts or even injection molded parts in Fort Worth, TX. Some of the principal advantages for your Fort Worth, TX company are:

Quality

Machined parts can be made to a very high caliber, based entirely on your Fort Worth, TX company’s specifications and tolerances. This means our CNC machinists can take a little extra time on tight-tolerance pieces and individual features to guarantee the finest quality.

Lead Times

Machined parts can be manufactured faster than pieces made via other manufacturing production like Fort Worth, TX molding. This is mostly because of to the lack of labor-intensive tooling, therefore having the ability to rely more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing procedure itself is also highly effective and efficient – some of our CNC machines have rapid rates of up to 45 yards per minute, even though we do not machine parts at those speeds. The speed and accuracy of our CNC machines, along with the one-step nature of machining combine to make machined parts some of the fastest to manufacture, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is because CNC machines are not subjected to the same constraints of molding, like thin walls and tapering. Machined parts can be robust and thick, yet their features can be fine and complex. Despite machined parts having some restrictions when it comes to, for example, internal sections and deep channels, machining still represents the most geometrically flexible manufacturing procedure for your Fort Worth, TX production run.

Alterations

Because CNC machined parts are manufactured from digital CAD files, it’s possible to make changes throughout the machining procedure, up until the final moment. This is extremely helpful during our research and experimental development and prototyping stages, when our engineers or your team might look to make fractional adjustments or refinements to the machined part or create numerous versions. It also lessens the probability of waste, as defective parts are far less likely to come about.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have usually been extruded or cast. This makes them foundationally strong compared to, for example, 3D printed parts, which can be predominantly weaker along one axis, where one layer is built on top of the next.

Surface Finish

Machined parts entirely circumvent the surface quality issues associated with molding like flow lines, jetting, and flash at the parting line. With a small amount of post-processing, which is accomplished in our value-added services, machined parts can be brought to a high level regarding surface finish. Machining also provides a superior surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing can leave noticeable layer lines on the surface of the part, which then must be smoothed over via sanding or chemical treatment. Machined parts do not produce these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts due to the fact that they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a process that takes a long time and can be expensive. However, machining with Roberson Machine Company is unique in providing high-quality parts with no MOQ, making it suitable for smaller companies in Fort Worth, TX, small production runs, and prototyping.

Give us a call today to learn more about machined parts and our CNC capabilities for your Fort Worth, TX project at 573-646-3996 or connect with us online.

Machined Parts Fort Worth, TX | CNC Machined Parts Near You in Fort Worth, TX | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Fort Worth, TX?

The Roberson Machine Company facilities are fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with cutting-edge computer control to permit rapid and precise manufacturing. Our horizontal CNC mills quickly and accurately cut your component material to tight tolerances. Our CNC horizontal milling services revolve around state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are set at 90 degrees to the floor, making them optimal for projects requiring large production runs of moderately complex parts. Although horizontal mills are better suited for more difficult milling jobs, vertical mills are capable of an array of designs for your company’s project in Fort Worth, TX.

  • CNC Horizontal Lathes
  • As opposed to mills, which rely on spinning of the cutting tool, lathes instead rotate the workpiece as material is cut. In comparison to manual lathes, which call for a degree of expertise to operate, CNC lathes drastically lessen the amount of labor and the probability of human error. These advantages translate into marked decreases in cost and defect rates for you in Fort Worth, TX.

Reach Out to a Leader in Custom Machined Parts For Your Company in Fort Worth, TX | Roberson Machine Company

From prototypes to production, and every phase in between, Roberson Machine Company optimizes your whole Fort Worth, TX production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are all-in in supporting you, your work plan, and your success in Fort Worth, TX.

Call us today for more information regarding our machined parts production and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema