Image
Pages

Las Vegas, NV

Machined Parts Las Vegas, NV | Las Vegas, NV CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Las Vegas, NV

Machined Parts Las Vegas, NV. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere in Las Vegas, NV. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than just objects built using our machinery. They are parts constructed using our cutting machines, such as our CNC mills and lathes. Machined parts can be metal, plastic, or perhaps some other materials on occasion, but they have to come from a material that can be cut without majorly altering its form. Machined parts come from a tried-and-tested manufacturing method that we have utilized as an industry standard for decades. No matter your Las Vegas, NV company’s industry, or in which piece of equipment your machined parts are being employed, they meet all industry-specific certifications and standards. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to get the custom machined parts you need in Las Vegas, NV. Give us a call right away at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My Las Vegas, NV Company?

Machined parts can be made from many different materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are especially difficult to penetrate with a cutting tool and may cause the tool to vibrate more, thus possibly reducing quality. Exceptionally soft materials, as well as materials with a low melting point, may become damaged once coming into contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we are available to a conversation involving machining parts with other materials. Just give us a call at 573-646-3996 or connect with us online.

What Are the Applications of Machined Parts For My Company in Las Vegas, NV?

Machined parts are used in virtually all kinds of businesses, throughout every industry – from medical devices to consumer goods. Some typical machined parts used in a multitude of industries are:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Las Vegas, NV business is scoping out a project using machined parts, call Roberson Machine Company at 573-646-3996 or fill out our online quote tool.

In addition to our machined parts for your company in Las Vegas, NV, Roberson Machine Company provides the following for our Las Vegas, NV partners:

Machined Parts Las Vegas, NV | CNC Machined Parts and Services Near Las Vegas, NV | Roberson Machine Company

What Are the Advantages of Using Machined Parts at My Las Vegas, NV Company?

Machined parts from Roberson Machine Company offer particular benefits that might not be possible with injection molded parts or even 3D printed parts in Las Vegas, NV. Some of the pivotal advantages for your Las Vegas, NV company include:

Quality

Machined parts can be cut to a very high quality, based primarily on your Las Vegas, NV company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance pieces and individual features to ensure the finest quality.

Lead Times

Machined parts can be produced quicker than parts made via other manufacturing processes like Las Vegas, NV molding. This is partly due to the lack of labor-intensive tooling, being able to rely more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing process itself is also highly effective and efficient – several of our CNC machines have rapid rates of nearly 45 yards per minute, even though we don’t manufacture machined parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to produce, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is due to the fact that CNC machines aren’t subjected to the same constraints of molding, like tapering and thin walls. Machined parts can be thick and robust, yet their features can be fine and detailed. Despite machined parts having some limitations when it comes to, for example, deep channels and internal sections, machining still represents the most geometrically flexible production procedure for your Las Vegas, NV production run.

Alterations

Because CNC machined parts are manufactured from digital CAD files, it’s possible to make changes throughout the machining process, right up until the final moment. This is extremely favorable during prototyping and our research and experimental development phases, when your staff or our engineers might want to make slight, fractional changes or clarifications to the machined part or create multiple versions. It also lessens the probability of waste, as defective parts are far less likely to be produced.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been extruded or cast. This makes them foundationally solid in comparison to, for example, 3D printed pieces, which can be much weaker along one axis, where one layer is built on top of the next.

Surface Finish

While molding parts deals with surface quality issues such as flow lines, jetting, and flash at the parting line, machined parts completely circumvent them. With a moderate amount of post-processing, which is achieved in our value-added services, machined parts can be brought to a high standard in terms of surface finish. Machining also gives a far superior surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing leaves visible layer lines on the surface of the part, which then must be smoothed over by chemical treatment or sanding. Machined parts don’t produce these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cut directly from a blank workpiece, making it cost-effective and possible to order extremely small quantities or even one-off parts. For molded parts, it is necessary to fabricate metal tooling – a process that seems endless and can be expensive. But machining with Roberson Machine Company is unique in offering top-quality parts with no MOQ, making it convenient for smaller companies in Las Vegas, NV, small production runs, and prototyping.

Give us a call now to learn more about machined parts and our CNC capabilities for your Las Vegas, NV work plan at 573-646-3996 or connect with us online.

Machined Parts Las Vegas, NV | CNC Machined Parts Near You in Las Vegas, NV | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Las Vegas, NV?

The Roberson Machine Company facility is fully stocked with high-end CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting to remove materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to allow for rapid and precise production. Our horizontal CNC mills quickly and accurately cut your component material to the tightest of tolerances. Our CNC horizontal milling services benefit from the availability of our state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them optimal for projects calling for large production runs of moderately complex parts. While horizontal mills are more beneficial in complicated milling projects, vertical mills are adept in a wide variety of designs for your business’s project in Las Vegas, NV.

  • CNC Horizontal Lathes
  • In contrast to mills, which rely on rotation of the cutting tool, lathes instead spin the workpiece as material is removed. In comparison to manual lathes, which require a degree of expertise to operate, CNC lathes drastically lessen the probability of human error, as well as the amount of labor. These benefits translate into marked decreases in cost and defect rates for your Las Vegas, NV company.

Connect With a Leader in Custom Machined Parts For Your Company in Las Vegas, NV | Roberson Machine Company

From prototypes to production, and every process in between, Roberson Machine Company optimizes your whole Las Vegas, NV production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership team, along with our talented and experienced machinists are all-in in supporting you, your project, and your success in Las Vegas, NV.

Give us a call now to learn more about our machined parts manufacturing and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema