Buffalo, NY

Machined Parts Buffalo, NY

Machined Parts Buffalo, NY. Machined parts are everywhere in Buffalo, NY. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than just objects manufactured utilizing our machinery. They are parts fabricated using our cutting machines, like our CNC mills and lathes. Machined parts can be plastic, metal, or occasionally perhaps some other materials, but they have to come from a material that can be cut without majorly deforming. Machined parts come from a tried-and-tested manufacturing technique that we have used as an industry standard for decades. Regardless of your Buffalo, NY company’s industry, or in which component your machined parts are being utilized, they meet all industry-specific certifications and standards. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to receive the custom machined parts you need precisely when you need them in Buffalo, NY. Give us a call right away at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My Buffalo, NY Company?

Machined parts can be made from a variety of materials, including metals and plastics. However, some materials are easier to machine than others. Exceptionally hard materials are difficult to puncture with a cutting tool and may cause the tool to shake or vibrate more, thus likely diminishing quality. Exceptionally soft materials, as well as materials with a low melting point, may deform upon contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we are available to discussing the possibility of machining parts with other materials. Just give us a call at 573-646-3996 or contact us online.

• Metals: Aluminum (6061, 7075, 7050 or “aa7050 alloy”), Stainless Steel (303, 304), Magnesium, Titanium, Zinc, Brass, Bronze, Copper
• Plastics: ABS, PC, <a href="PC-ABS, PP, PS, POM, PMMA, PAGF30, PCGF30, Teflon, DHPE, HDPE, PPS, PEEK

What Are the Best Ways For My Buffalo, NY Company to Use Machined Parts?

Machined parts are utilized in virtually all kinds of companies, throughout every industry – from consumer goods to medical devices. Some common machined parts used in a variety of industries are:

• Fasteners
• Valve bodies
• Ball joints
• Gears
• Shafts
• Housings
• Brackets
• Rollers

If your Buffalo, NY company is scoping out a project using machined parts, give Roberson Machine Company a call at 573-646-3996 or fill out our online quote tool.

In addition to our machined parts for your company in Buffalo, NY, Roberson Machine Company offers the following to our Buffalo, NY clients:

• Plastic Parts Manufacturer
• Precision Manufacturing
• Aerospace Machining
• Machined Plastic Parts
• CNC Companies
• Steel Machining
• Aluminum Fabrication
• Machine Shop

What Are the Advantages of Machined Parts in Buffalo, NY?

Machined parts from Roberson Machine Company offer certain advantages that might not be possible with 3D printed parts or even injection molded parts in Buffalo, NY. Some of the principal advantages in Buffalo, NY are:

Quality

Machined parts can be built to a very high standard, based entirely on your Buffalo, NY company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance pieces and individual features to ensure the best quality.

Lead Times

Machined parts can be manufactured quicker than pieces made via other production production like Buffalo, NY molding. This is mostly due to the lack of labor-intensive tooling, therefore being able to rely more on the CAD and CAM software our machinists use with the CNC machines. But our manufacturing procedure itself is also highly efficient – some of our CNC machines have rapid rates of nearly 45 yards per minute, although we don’t machine parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to manufacture, diminishing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide range of shapes and sizes. This is because CNC machines aren’t subject to the same limitations of molding, like tapering and thin walls. Machined parts can be thick and robust, yet their features can be intricate and complex. Despite machined parts having some restrictions when it comes to, for example, internal sections and deep channels, machining still represents the most geometrically flexible manufacturing procedure for your Buffalo, NY production run.

Alterations

Due to the fact that CNC machined parts are produced from digital CAD files, it’s possible to make changes throughout the machining procedure, up until the last minute. This is extremely helpful throughout our research and experimental development and prototyping stages, when your staff or our engineers might look to make slight, fractional adjustments or clarifications to the machined part or create numerous versions. It also reduces the probability of waste, as defective parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been extruded or cast. This makes them foundationally strong compared to, for example, 3D printed pieces, which can be much weaker along one axis, where one layer is built atop the next.

Surface Finish

While molding parts deals with surface quality issues like flow lines, jetting, and flash at the parting line, machined parts completely avoid them. With a moderate amount of post-processing, which is accomplished in our value-added services, machined parts can be brought to an extremely high level in terms of surface finish. Machining also provides a superior surface finish to 3D printing, even prior to any secondary service has been started by our machinists. 3D printing can leave noticeable layer lines on the surface of the part, which must be smoothed over via sanding or chemical treatment. Machined parts don’t produce these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cut directly from a blank workpiece, making it cost-effective and possible to order extremely small quantities or even one-off parts. It is a requirement when molding parts that you fabricate metal tooling – a procedure that seems endless and can be expensive. However, machining with Roberson Machine Company is unique in offering top-quality parts with no MOQ, making it convenient for smaller companies in Buffalo, NY, small production runs, and prototyping.

Give us a call today to learn more about machined parts and our CNC capabilities for your Buffalo, NY work plan at 573-646-3996 or reach out to us online.

What CNC Machinery is Necessary to Make Machined Parts For My Company in Buffalo, NY?

The Roberson Machine Company facilities are fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

• CNC Horizontal Mills

All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to permit accurate and rapid manufacturing. Our horizontal CNC mills accurately and quickly shape your component material to the tightest of tolerances. Our CNC horizontal milling services benefit from the availability of our modern 3 axis, 4 axis, and 5 axis machines.

• CNC Vertical Mills

Vertical CNC mills feature spindles that are set at 90 degrees to the floor, making them optimal for projects requiring large production runs of moderately intricate parts. Although horizontal mills are better suited for more complicated milling projects, vertical mills are adept in an array of designs for your business’s project in Buffalo, NY.

• CNC Horizontal Lathes

In contrast to mills, which bank on spinning of the cutting tool, lathes instead spin the workpiece as material is cut. Compared to manual lathes, which call for a degree of expertise to operate, CNC lathes drastically diminish the probability of human error, as well as the amount of labor. These advantages translate into marked decreases in cost and defect rates for you in Buffalo, NY.

Connect With the Leader in Custom Machined Parts For Your Buffalo, NY Company | Roberson Machine Company

From production to prototypes, and each process in between, Roberson Machine Company optimizes your whole Buffalo, NY production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our dedicated leadership teamand talented and knowledgeable machinists are all-in in supporting you, your work plan, and doing whatever it takes for you to succeed in Buffalo, NY.

Give us a call today for more information regarding our machined parts manufacturing and services at 573-646-3996 or contact us online.