Image
Pages

St Louis, MO

Machined Parts St Louis, MO | St Louis, MO CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts St Louis, MO

Machined Parts St Louis, MO. Machined parts are everywhere around you in St Louis, MO. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than simply things built using our machinery. They are parts constructed using our cutting machines, like our CNC mills and lathes. Machined parts can be metal, plastic, or occasionally perhaps some other materials, but they must come from a material that can be cut without drastically deforming. Machined parts come from a tried-and-tested manufacturing technique that we have used as an industry standard for decades. No matter your St Louis, MO company’s industry, or in which component your machined parts are being employed, they meet all industry-specific certifications and standards. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it simple to get the custom machined parts you need precisely when you need them in St Louis, MO. Call us today at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My St Louis, MO Company?

Machined parts can be made from a variety of materials, including metals and plastics. Yet, some materials are easier to machine than others. Exceptionally hard materials are especially difficult to puncture with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely reducing quality. Extremely soft materials, as well as materials with a low melting point, may deform upon contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we are available to discussing the possibility of machining parts with other materials. Just give us a call at 573-646-3996 or connect with us online.

What Are the Best Ways For My St Louis, MO Company to Use Machined Parts?

Machined parts are used in virtually all kinds of businesses, throughout every industry – from medical devices to consumer goods. Some typical machined parts used in a variety of industries are:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your St Louis, MO company is planning a production run of machined parts, call Roberson Machine Company at 573-646-3996 or fill out our online quote tool.

Along with our machined parts for your company in St Louis, MO, Roberson Machine Company provides the following for our St Louis, MO partners:

Machined Parts St Louis, MO | CNC Machined Parts and Services Near St Louis, MO | Roberson Machine Company

What Are the Advantages of Machined Parts in St Louis, MO?

Machined parts from Roberson Machine Company provide particular benefits that may not be possible with 3D printed parts or even injection molded parts in St Louis, MO. Some of the key advantages in St Louis, MO include:

Quality

Machined parts can be made to a very high caliber, based primarily on your St Louis, MO company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance pieces and individual aspects to guarantee the best quality.

Lead Times

Machined parts can be produced faster than parts made via other manufacturing processes like St Louis, MO molding. This is mainly because of to the lack of labor-intensive tooling, therefore having the ability to bank more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing process itself is also highly efficient – some of our CNC machines have rapid rates of up to 45 yards per minute, although we do not machine parts at those speeds. The one-step nature of machining and the speed of our CNC machines combine to make machined parts some of the fastest to produce, reducing lead times for shorter time-to-market and practical rapid prototyping.

Design Freedom

Machined parts can have a wide variety of sizes and shapes. This is due to the fact that CNC machines aren’t subjected to the same limitations of molding, like thin walls and tapering. Machined parts can be thick and robust, yet their features can be intricate and detailed. Despite machined parts having some limitations when it comes to, for example, deep channels and internal sections, machining still represents the most geometrically flexible manufacturing process for your St Louis, MO production run.

Alterations

Because CNC machined parts are produced from digital CAD files, it is possible to make alterations throughout the machining procedure, right up until the last minute. This is extremely favorable during our research and experimental development and prototyping stages, when your staff or our engineers might look to make fractional adjustments or clarifications to the machined part or create numerous versions. It also reduces the likelihood of waste, as defective parts are far less likely to be produced.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have usually been extruded or cast. This makes them foundationally strong in comparison to, say, for example, 3D printed pieces, which can be much flimsier along one axis, where one layer is added atop the next.

Surface Finish

While molding parts deals with surface quality issues like flow lines, jetting, and flash at the parting line, machined parts entirely avoid them. With a moderate amount of post-processing, which is accomplished in our value-added services, machined parts can be brought to a high standard regarding surface finish. Machining also gives a better surface finish to 3D printing, even prior to any secondary service has been carried out by our machinists. 3D printing can leave visible layer lines on the surface of the part, which then must be smoothed over through sanding or chemical treatment. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts because they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a procedure that seems endless and can be expensive. But machining with Roberson Machine Company is unique in offering top-quality parts with no MOQ, making it convenient for smaller companies in St Louis, MO, small production runs, and prototyping.

Give us a call now to learn more about machined parts and our CNC capabilities for your St Louis, MO project at 573-646-3996 or reach out to us online.

Machined Parts St Louis, MO | CNC Machined Parts Near You in St Louis, MO | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in St Louis, MO?

The Roberson Machine Company facility is fully stocked with high-end CNC machinery capable of manufacturing accurately machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with the latest computer control to allow for accurate and rapid production. Our horizontal CNC mills accurately and quickly cut your component material to tight tolerances. Our CNC horizontal milling services benefit from the availability of our state-of-the-art 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are set at 90 degrees to the floor, making them optimal for jobs requiring large production runs of fairly complex parts. Although horizontal mills are more beneficial in difficult milling projects, vertical mills are adept in an array of designs for your company’s work plan in St Louis, MO.

  • CNC Horizontal Lathes
  • As opposed to mills, which bank on rotation of the cutting tool, lathes instead spin the workpiece as material is subtracted. In comparison to manual lathes, which call for a degree of expertise to operate, CNC lathes drastically lessen the amount of labor and the probability of human error. These advantages translate into marked decreases in cost and defect rates for you in St Louis, MO.

Contact a Leader in Custom Machined Parts For Your Company in St Louis, MO | Roberson Machine Company

From prototypes to production, and every phase in between, Roberson Machine Company optimizes your entire St Louis, MO production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are passionate about supporting you, your project, and your success in St Louis, MO.

Give us a call today for more information regarding our machined parts production and services at 573-646-3996 or contact us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema