Image
Pages

Chattanooga, TN

Machined Parts Chattanooga, TN | Chattanooga, TN CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts Chattanooga, TN

Machined Parts Chattanooga, TN. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere in Chattanooga, TN. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than simply things manufactured utilizing our machinery. They are parts fabricated using our cutting machines, like our CNC mills and lathes. Machined parts can be plastic, metal, or perhaps some other materials on occasion, but they must come from a material that can be cut without drastically altering its form. Machined parts come from a tried-and-tested manufacturing technique that we have used as an industry standard for decades. No matter your Chattanooga, TN company’s industry, or in which component your machined parts are being employed, they meet all industry-specific standards and certifications. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to receive the custom machined parts you need precisely when you need them in Chattanooga, TN. Give us a call right away at 573-646-3996 or connect with us online.

What Materials Can Be Used For Machined Parts For My Chattanooga, TN Company?

Machined parts can be made from a variety of materials, including metals and plastics. Yet, some materials are easier to machine than others. Extremely hard materials are difficult to penetrate with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely diminishing quality. Exceptionally soft materials, as well as materials with a low melting point, may become damaged upon contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we are available to a conversation involving machining parts with other materials. Just give us a call at 573-646-3996 or contact us online.

What Are the Best Ways For My Chattanooga, TN Company to Use Machined Parts?

Machined parts are utilized in virtually all types of businesses, throughout every industry – from consumer goods to medical devices. Some typical machined parts used in a multitude of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your Chattanooga, TN company is scoping out a project using machined parts, call Roberson Machine Company at 573-646-3996 or take advantage of our online quote tool.

Along with our machined parts for your company in Chattanooga, TN, Roberson Machine Company provides the following for our Chattanooga, TN partners:

Machined Parts Chattanooga, TN | CNC Machined Parts and Services Near Chattanooga, TN | Roberson Machine Company

What Are the Benefits of Machined Parts in Chattanooga, TN?

Machined parts from Roberson Machine Company provide particular benefits that may not be possible with 3D printed parts or even injection molded parts in Chattanooga, TN. Some of the pivotal advantages for your Chattanooga, TN company are:

Quality

Machined parts can be built to a very high quality, based entirely on your Chattanooga, TN company’s specifications and tolerances. This means our CNC machinists can take a little extra time on tight-tolerance workpieces and individual aspects to ensure the best quality.

Lead Times

Machined parts can be manufactured quicker than parts made via other production production like Chattanooga, TN molding. This is partly due to the lack of labor-intensive tooling, being able to bank more on the CAD and CAM software our machinists input into the CNC machines. But the manufacturing process itself is also highly efficient – several of our CNC machines have rapid rates of nearly 45 yards per minute, although we don’t machine parts at those speeds. The one-step nature of machining and the speed of our CNC machines combine to make machined parts some of the fastest to manufacture, diminishing lead times for shorter time-to-market and practical rapid prototyping.

Design Freedom

Machined parts can have a wide variety of sizes and shapes. This is because CNC machines aren’t subject to the same restrictions of molding, like thin walls and tapering. Machined parts can be thick and robust, yet their features can be fine and detailed. Although machined parts have some limitations when it comes to, for example, internal sections and deep channels, machining remains the most geometrically flexible manufacturing process for your Chattanooga, TN production run.

Alterations

Due to the fact that CNC machined parts are manufactured from digital CAD files, it’s possible to make alterations throughout the machining process, right up until the final moment. This is extremely useful throughout our research and experimental development and prototyping stages, when our engineers or your team might need to make slight, fractional adjustments or refinements to the machined part or create numerous versions. It also lessens the possibility of waste, as defective parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have typically been cast or extruded. This makes them foundationally solid compared to, for example, 3D printed parts, which can be much flimsier along one axis, where one layer is added on top of the next.

Surface Finish

Machined parts completely circumvent the surface quality issues associated with molding such as flow lines, jetting, and flash at the parting line. With a small amount of post-processing, which is attained in our value-added services, machined parts can be brought to an extremely high standard regarding surface finish. Machining also gives a superior surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing can leave visible layer lines on the surface of the part, which must be smoothed over by chemical treatment or sanding. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts because they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a procedure that takes a long time and can be expensive. However, machining with Roberson Machine Company is unique in providing top-quality parts with no MOQ, making it convenient for smaller companies in Chattanooga, TN, small production runs, and prototyping.

Call us today for more information regarding machined parts and our CNC capabilities for your Chattanooga, TN work plan at 573-646-3996 or connect with us online.

Machined Parts Chattanooga, TN | CNC Machined Parts Near You in Chattanooga, TN | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in Chattanooga, TN?

The Roberson Machine Company facilities are fully stocked with top-of-the-line CNC machinery capable of manufacturing precisely machined parts in a fraction of the time as our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with advanced computer control to permit accurate and rapid production. Our horizontal CNC mills accurately and quickly shape your component material to the tightest of tolerances. Our CNC horizontal milling services benefit from the availability of our modern 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them optimal for jobs requiring large production runs of fairly intricate parts. Although horizontal mills are better suited for more difficult milling projects, vertical mills are capable of a wide variety of designs for your business’s project in Chattanooga, TN.

  • CNC Horizontal Lathes
  • As opposed to mills, which bank on spinning of the cutting tool, lathes instead rotate the workpiece as material is removed. Compared to manual lathes, which need a degree of expertise to operate, CNC lathes drastically reduce the amount of labor and the probability of human error. These benefits translate into marked decreases in cost and defect rates for you in Chattanooga, TN.

Connect With the Leader in Custom Machined Parts For Your Company in Chattanooga, TN | Roberson Machine Company

From prototypes to production, and every process in between, Roberson Machine Company optimizes your whole Chattanooga, TN production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our devoted leadership teamand talented and knowledgeable machinists are all-in in supporting you, your work plan, and doing whatever it takes for you to succeed in Chattanooga, TN.

Call us now to learn more about our machined parts production and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema