Minneapolis, MN

Machined Parts Minneapolis, MN

Machined Parts Minneapolis, MN. Machined parts are everywhere in Minneapolis, MN. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, Roberson Machine Company has manufactured all sorts of parts using our proven process of CNC machining.

Machined parts are more than just objects built using our machinery. They are parts constructed using our cutting machines, like our CNC mills and lathes. Machined parts can be metal, plastic, or occasionally perhaps some other materials, but they have to come from a material that can be cut without majorly deforming. Machined parts come from a tried-and-tested manufacturing method that we have used as an industry standard for decades. No matter your Minneapolis, MN company’s industry, or in which component your machined parts are being employed, they meet all industry-specific standards and certifications. We guarantee it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to get the custom machined parts you need in Minneapolis, MN. Give us a call right away at 573-646-3996 or contact us online.

What Materials Can Be Used For Machined Parts For My Minneapolis, MN Company?

Machined parts can be made from a variety of materials, including metals and plastics. But, some materials are easier to machine than others. Extremely hard materials are difficult to puncture with a cutting tool, perhaps causing the tool to shake or vibrate more, thus likely reducing quality. Exceptionally soft materials, and materials with a low melting point, may deform upon contact with the cutting tool. Some of our most common machined part materials are listed below. As always, we’d be open to discussing the possibility of machining parts with other materials. Just call us at 573-646-3996 or contact us online.

• Metals: Aluminum (6061, 7075, 7050 or “aa7050 alloy”), Stainless Steel (303, 304), Magnesium, Titanium, Zinc, Brass, Bronze, Copper
• Plastics: ABS, PC, <a href="PC-ABS, PP, PS, POM, PMMA, PAGF30, PCGF30, Teflon, DHPE, HDPE, PPS, PEEK

What Are the Best Ways For My Minneapolis, MN Company to Use Machined Parts?

Machined parts are used in essentially all kinds of businesses, throughout every industry – from medical devices to consumer goods. Some common machined parts used in a multitude of industries are:

• Fasteners
• Valve bodies
• Ball joints
• Gears
• Shafts
• Housings
• Brackets
• Rollers

If your Minneapolis, MN company is planning a project using machined parts, call Roberson Machine Company at 573-646-3996 or take advantage of our online quote tool.

Along with our machined parts for your business in Minneapolis, MN, Roberson Machine Company provides the following for our Minneapolis, MN clients:

• CNC Milling Aluminum
• Plastic Parts Manufacturer
• Precision Manufacturing
• Aerospace Machining
• Machined Plastic Parts
• CNC Companies
• Steel Machining
• Aluminum Fabrication
• Machine Shop

What Are the Advantages of Using Machined Parts at My Minneapolis, MN Company?

Machined parts from Roberson Machine Company provide particular benefits that may not be possible with 3D printed parts or even injection molded parts in Minneapolis, MN. Some of the principal advantages in Minneapolis, MN are:

Quality

Machined parts can be built to an exceptionally high quality, based entirely on your Minneapolis, MN company’s specifications and tolerances. This means our CNC machinists can take extra time on tight-tolerance parts and individual aspects to guarantee the best quality.

Lead Times

Machined parts can be manufactured quicker than pieces made via other manufacturing processes like Minneapolis, MN molding. This is mostly due to the lack of labor-intensive tooling, therefore having the ability to bank more on the CAD and CAM software our machinists use with the CNC machines. But the manufacturing procedure itself is also highly effective and efficient – several of our CNC machines have rapid rates of almost 45 yards per minute, although we don’t produce machined parts at those speeds. The one-step nature of machining and the speed of our CNC machines combine to make machined parts some of the fastest to produce, diminishing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide variety of sizes and shapes. This is due to the fact that CNC machines aren’t subjected to the same limitations of molding, like thin walls and tapering. Machined parts can be robust and thick, yet their features can be intricate and detailed. Despite machined parts having some limitations when it comes to, for example, internal sections and deep channels, machining still represents the most geometrically flexible manufacturing procedure for your Minneapolis, MN production run.

Alterations

Because CNC machined parts are made from digital CAD files, it is possible to make changes throughout the machining procedure, right up until the final moment. This is extremely helpful throughout our research and experimental development and prototyping phases, when our engineers or your staff may need to make fractional changes or clarifications to the machined part or create numerous versions. It also lessens the likelihood of waste, as erroneous parts are far less likely to be produced.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been extruded or cast. This makes them foundationally strong compared to, say, for example, 3D printed parts, which can be predominantly flimsier along one axis, where one layer is added atop the next.

Surface Finish

While molding parts deals with surface quality issues like flow lines, jetting, and flash at the parting line, machined parts completely circumvent them. With a moderate amount of post-processing, which is achieved in our value-added services, machined parts can be brought to a high level regarding surface finish. Machining also gives a superior surface finish to 3D printing, even prior to any secondary service has been started by our machinists. 3D printing can leave noticeable layer lines on the surface of the part, which then must be smoothed over via sanding or chemical treatment. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cut directly from a blank workpiece, making it cost-effective and possible to order extremely small quantities or even one-off parts. For molded parts, it is necessary to fabricate metal tooling – a procedure that takes a long time and can be costly. But machining with Roberson Machine Company is unique in offering high-quality parts with no MOQ, making it a good option for smaller companies in Minneapolis, MN, small production runs, and prototyping.

Give us a call now for more information regarding machined parts and our CNC capabilities for your Minneapolis, MN work plan at 573-646-3996 or connect with us online.

What CNC Machinery is Necessary to Make Machined Parts For My Company in Minneapolis, MN?

The Roberson Machine Company facilities are fully stocked with high-end CNC machinery capable of manufacturing accurately machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

• CNC Horizontal Mills

All mills use rotary cutting in the subtractive manufacturing process of removing materials from a workpiece, but our CNC mills combine the cutting procedure with advanced computer control to permit accurate and rapid manufacturing. Our horizontal CNC mills quickly and accurately shape your component material to the tightest of tolerances. Our CNC horizontal milling services revolve around state-of-the-art 3 axis, 4 axis, and 5 axis machines.

• CNC Vertical Mills

Vertical CNC mills feature spindles that are perpendicular to the ground, making them ideal for projects calling for large production runs of fairly complex parts. Although horizontal mills are more beneficial in complicated milling projects, vertical mills are capable of a wide variety of designs for your company’s work plan in Minneapolis, MN.

• CNC Horizontal Lathes

In contrast to mills, which rely on spinning of the cutting tool, lathes instead spin the workpiece as material is cut. In comparison to manual lathes, which need a degree of expertise to operate, CNC lathes drastically reduce the probability of human error, as well as the amount of labor. These benefits translate into marked decreases in cost and defect rates for your Minneapolis, MN company.

Contact a Leader in Custom Machined Parts For Your Minneapolis, MN Company | Roberson Machine Company

From prototypes to production, and each process in between, Roberson Machine Company optimizes your whole Minneapolis, MN production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything regarding CNC machined parts. Our devoted leadership team, along with our skilled and knowledgeable machinists are all-in in supporting you, your project, and doing whatever it takes for you to succeed in Minneapolis, MN.

Give us a call today for more information regarding our machined parts production and services at 573-646-3996 or contact with us online.