Image
Pages

St. Petersburg, FL

Machined Parts St. Petersburg, FL | St. Petersburg, FL CNC Machining for Machined Parts | Roberson Machine Company

Machined Parts St. Petersburg, FL

Machined Parts St. Petersburg, FL. From tiny metal fasteners used on the motherboard of your computer to aircraft engine components, machined parts are everywhere around you in St. Petersburg, FL. Roberson Machine Company has produced all sorts of machined parts using our proven process of CNC machining.

Machined parts are more than simply things built using our machinery. They are parts fabricated using our cutting machines, such as our CNC lathes and mills. Machined parts can be plastic, metal, or perhaps some other materials on occasion, but they have to be made from a material that can be cut without excessively deforming. Machined parts come from a tried-and-tested manufacturing method that we have utilized as an industry standard for decades. Regardless of your St. Petersburg, FL company’s industry, or in which component your machined parts are being employed, they meet all industry-specific certifications and standards. We make sure of it.

Roberson Machine Company is a custom manufacturer of precision CNC machined parts. We make it easy to get the custom machined parts you need precisely when you need them in St. Petersburg, FL. Give us a call right away at 573-646-3996 or reach out to us online.

What Materials Can Be Used For Machined Parts For My St. Petersburg, FL Company?

Machined parts can be made from many different materials, including metals and plastics. But, some materials are easier to machine than others. Extremely hard materials are difficult to puncture with a cutting tool and may cause the tool to shake or vibrate more, thus likely reducing quality. Exceptionally soft materials, and materials with a low melting point, may deform once coming into contact with the cutting tool. Several of our most common machined part materials are listed below. As always, we are available to discussing the possibility of machining parts with other materials. Just give us a call at 573-646-3996 or connect with us online.

What Are the Best Ways For My St. Petersburg, FL Company to Use Machined Parts?

Machined parts are utilized in virtually all kinds of businesses, throughout every industry – from consumer goods to medical devices. Some typical machined parts used in a variety of industries include:

  • Fasteners
  • Valve bodies
  • Ball joints
  • Gears
  • Shafts
  • Housings
  • Brackets
  • Rollers

If your St. Petersburg, FL business is planning a project using machined parts, give Roberson Machine Company a call at 573-646-3996 or use our online quote tool.

In addition to our machined parts for your business in St. Petersburg, FL, Roberson Machine Company offers the following to our St. Petersburg, FL partners:

Machined Parts St. Petersburg, FL | CNC Machined Parts and Services Near St. Petersburg, FL | Roberson Machine Company

What Are the Benefits of Using Machined Parts at My St. Petersburg, FL Company?

Machined parts from Roberson Machine Company offer particular benefits that might not be possible with 3D printed parts or even injection molded parts in St. Petersburg, FL. Some of the principal advantages for your St. Petersburg, FL company include:

Quality

Machined parts can be cut to a very high caliber, based primarily on your St. Petersburg, FL company’s tolerances and specifications. This means our CNC machinists can take a little extra time on tight-tolerance workpieces and individual features to guarantee the best quality.

Lead Times

Machined parts can be manufactured faster than pieces made via other production processes like St. Petersburg, FL molding. This is mostly because of to the lack of labor-intensive tooling, therefore having the ability to rely more on the CAD and CAM software our machinists input into the CNC machines. But our manufacturing procedure itself is also highly effective and efficient – some of our CNC machines have rapid rates of up to 45 yards per minute, although we don’t machine parts at those speeds. The one-step nature of machining and the speed and accuracy of our CNC machines combine to make machined parts some of the fastest to produce, reducing lead times for practical rapid prototyping and shorter time-to-market.

Design Freedom

Machined parts can have a wide variety of sizes and shapes. This is because CNC machines are not subject to the same restrictions of molding, like tapering and thin walls. Machined parts can be thick and robust, yet their features can be fine and complex. Despite machined parts having some restrictions when it comes to, for example, deep channels and internal sections, machining still represents the most geometrically flexible production procedure for your St. Petersburg, FL production run.

Alterations

Due to the fact that CNC machined parts are produced from digital CAD files, it is possible to make alterations throughout the machining procedure, right up until the last minute. This is extremely helpful during our research and experimental development and prototyping phases, when your team or our engineers might need to make fractional changes or clarifications to the machined part or develop multiple versions. It also lessens the probability of waste, as defective parts are far less likely to come off the machines.

Strength

Machined parts are cut from solid pieces of material known as blanks, which have normally been extruded or cast. This makes them foundationally solid in comparison to, for example, 3D printed parts, which can be predominantly flimsier along one axis, where one layer is added on top of the next.

Surface Finish

While molding parts deals with surface quality issues like flow lines, jetting, and flash at the parting line, machined parts entirely avoid them. With a moderate amount of post-processing, which is attained in our value-added services, machined parts can be brought to an extremely high level in terms of surface finish. Machining also gives a far superior surface finish to 3D printing, even before any secondary service has been completed by our machinists. 3D printing leaves noticeable layer lines on the surface of the part, which must be smoothed over via chemical treatment or sanding. Machined parts don’t have these layer lines.

No Minimum Order Quantity (MOQ)

Machined parts are cost-effective and available in small quantities or even one-off parts because they are cut directly from a blank workpiece. It is a requirement when molding parts that you fabricate metal tooling – a procedure that takes a long time and can be expensive. However, machining with Roberson Machine Company is unique in providing top-quality parts with no MOQ, making it a good option for smaller companies in St. Petersburg, FL, small production runs, and prototyping.

Give us a call today to learn more about machined parts and our CNC capabilities for your St. Petersburg, FL project at 573-646-3996 or contact us online.

Machined Parts St. Petersburg, FL | CNC Machined Parts Near You in St. Petersburg, FL | Roberson Machine Company

What CNC Machinery is Necessary to Make Machined Parts For My Company in St. Petersburg, FL?

The Roberson Machine Company facilities are fully stocked with high-end CNC machinery capable of manufacturing precisely machined parts in a fraction of the time compared to our competitors. Our full range of equipment includes:

  • CNC Horizontal Mills
  • All mills use rotary cutting to remove materials from a workpiece, but our CNC mills combine the cutting procedure with advanced computer control to allow for rapid and accurate production. Our horizontal CNC mills quickly and accurately cut your component material to the tightest of tolerances. Our CNC horizontal milling services revolve around modern 3 axis, 4 axis, and 5 axis machines.

  • CNC Vertical Mills
  • Vertical CNC mills feature spindles that are perpendicular to the ground, making them optimal for jobs calling for large production runs of moderately intricate parts. Although horizontal mills are better suited for more complicated milling projects, vertical mills are capable of an array of designs for your business’s work plan in St. Petersburg, FL.

  • CNC Horizontal Lathes
  • In contrast to mills, which rely on rotation of the cutting tool, lathes instead spin the workpiece as material is subtracted. Compared to manual lathes, which require a degree of expertise to operate, CNC lathes drastically diminish the amount of labor and the probability of human error. These benefits translate into decreases in cost and error rates for your St. Petersburg, FL company.

Reach Out to the Leader in Custom Machined Parts For Your St. Petersburg, FL Company | Roberson Machine Company

From prototypes to production, and every step in between, Roberson Machine Company optimizes your entire St. Petersburg, FL production workflow with our CNC machines and services. We are truly your one-stop shop, your single-source manufacturer, for everything when it comes to CNC machined parts. Our dedicated leadership teamand talented and knowledgeable machinists are passionate about supporting you, your project, and your success in St. Petersburg, FL.

Call us now to learn more about our machined parts manufacturing and services at 573-646-3996 or contact with us online.

Contact Form

    Exceptional Customer Care & Precise Accuracy

    Get Down to Brass Tacks

    Competitively priced with vast capabilities and extreme precision, we have what you need. To get the personalized care of a craft shop and the capabilities of a high-volume plant, contact us today.

    Get a Free Quote

    Featured Blogs

    !Schema