Tolerances are tight in Pittsburgh, PA, Aerospace Manufacturing. At Roberson Machine Company, we integrate advanced high-precision CNC machining with tight process control to deliver aerospace components that surpass exacting industry standards. From prototype machining to full-scale production, our team maintains consistent, reliable results across every phase of the Pittsburgh, PA, Aerospace Manufacturing process.
We’re ready to support your next project. Send us a message or call 573-646-3996 to speak with our team about Pittsburgh, PA, aerospace manufacturing.
Table of Contents
- Precision CNC Manufacturing for Aerospace Applications
- CNC Machining Services for Aerospace Manufacturing
- Aerospace Materials We Machine
- Why Aerospace Companies Work With Roberson
Read more about our Pittsburgh, PA, aerospace machining capabilities and other services on our blog.
Precision CNC Manufacturing for Aerospace Applications
There’s no room for error in aerospace. From structural brackets to engine components, each part must be machined with absolute precision from start to finish.
From prototyping to scaled production, we provide aerospace manufacturers with CNC machining tailored for precision, repeatability, and documentation. Common parts we machine include:
- Structural brackets and supports, including roller-lift system components
- Avionics enclosures and mounts
- Hydraulic and fuel system housings
- Engine and propulsion system components
- Satellite and space hardware
- Flight control assemblies
Every part comes with its own set of challenges — from complex geometry to challenging materials to strict inspection requirements. Our machining capabilities are built to handle the demands of aerospace manufacturing at every stage of production.
CNC Machining Services for Aerospace Manufacturing
We leverage cutting-edge CNC technology in our aerospace manufacturing services to deliver the accuracy and consistency demanded by critical flight components. From early development to large production batches, we’ve got you covered.
5-Axis CNC Milling
Using advanced 5-axis milling equipment, we efficiently machine complex aerospace geometries in a single setup, enhancing accuracy and minimizing cycle time. This is ideal for structural components, housings, brackets, and aerodynamic surfaces with compound angles.
Multi-Axis CNC Turning
We specialize in high-precision shafts, bushings, pins, and rotational components with strict concentricity and roundness, made possible by multi-axis lathes performing complex aerospace turning in one pass.
Wire EDM Machining
For intricate features, internal geometries, and heat-sensitive aerospace alloys, Wire EDM provides burr-free, high-precision cutting, particularly useful for fuel systems, small engine parts, and fine-tolerance components.
Prototype Machining
During development, qualification, and testing, we provide aerospace customers with quick prototype machining to help engineers validate design form, fit, and function prior to production.
Precision CNC Machining
Across all services, we maintain strict process controls to uphold dimensional accuracy, repeatability, and surface finishes that meet or exceed aerospace standards. Every part is carefully inspected and documented according to customer requirements.
When you choose us as your machining partner, you get aerospace parts built for reliability and exacting standards. Our commitment to quality and precision supports your project’s success at every phase.
Aerospace Materials We Machine
The aerospace industry relies on materials that combine strength, lightweight properties, corrosion resistance, and heat tolerance. Roberson Machine Company routinely handles these metals and high-performance alloys, producing precise and clean aerospace components, even with difficult materials.
- Aluminum (6061, 7075, 7050): Favored for its corrosion resistance and light weight, aluminum is ideal for airframe components, housings, and structural assemblies. We employ advanced aluminum CNC machining to produce complex aerospace parts with exacting standards.
- Titanium (Grades 2, 5 / 6Al-4V): This strong, corrosion-resistant, and lightweight metal is widely used in aerospace for fasteners, brackets, and hardware where strength-to-weight balance is critical. We utilize advanced titanium CNC machining to achieve tight tolerances on aerospace components.
- Stainless Steel (17-4PH, 15-5PH, 303, 316, 321): Renowned for its strength, corrosion resistance, and toughness, stainless steel is common in flight controls, engine parts, and high-stress aerospace assemblies. Learn more about stainless steel grades here.
- Nickel Alloys & Superalloys (Inconel, Hastelloy, Monel): Engineered to handle extreme heat and pressure, these materials are used in turbine components, exhaust systems, and propulsion hardware. Our CNC machining services handle nickel alloys with process stability and clean surface finishes.
- Tool Steels & Hardened Alloys (D2, A2, H13): Our EDM and CNC machining capabilities produce tooling, molds, and wear-resistant components used throughout aerospace manufacturing. We provide burr-free, complex cuts on hardened aerospace materials via wire EDM machining. Explore details on D2, A2, and H13.
- High-Performance Plastics (PEEK, Ultem, PTFE): Lightweight and resistant to chemicals, these materials are perfect for aerospace insulation, seals, electrical components, and specialty hardware. We employ advanced CNC machining capabilities to produce clean, precise parts from these plastics.
If your material isn’t listed, please contact us with your specs — we’re happy to assess your machining needs.
Why Pittsburgh, PA, Aerospace Companies Work With Roberson Machine Company
At Roberson Machine Company, controlling variation is key for every aerospace machining job we handle for Pittsburgh, PA, manufacturers. Our processes include precise programming, reliable fixturing, and thorough in-process inspections to ensure consistency from prototype to production. We prioritize dimensional accuracy, traceability, and part repeatability at every step.
Our quality management system includes documented procedures for part verification, dimensional inspection, and material traceability throughout the production cycle. We provide in-process checks, first article inspections, and CMM (coordinate measuring machine) reporting upon request, plus comprehensive documentation for aerospace projects with strict compliance needs.
What Sets Roberson Apart for Pittsburgh, PA, Aerospace Manufacturing
- Quality: We ensure every component adheres to your tolerance specifications and uses only materials approved for aerospace use.
- Reliability: We ensure your production stays on schedule through dependable delivery and consistent communication.
- Precision: We guarantee machining precision and repeatability, starting with first article inspections and continuing through production.
For over 20 years, we’ve supported aerospace manufacturers nationwide with precision CNC parts for flight-critical applications. Leveraging advanced multi-axis machining and skilled machinists, we handle everything from prototypes to large production runs, for simple or complex parts.
Additional services Roberson Machine Company provides includes:
- Wire EDM Parts
- Lathe Machine
- Precision Stainless Steel Machining
- CNC Lathe Machining
- Custom CNC Machining for Part Production
- CNC Machine Automation
- Oil and Gas Precision Machining
- Automotive Part Manufacturing
- EDM Machining
Along with aerospace manufacturing in Pittsburgh, PA, our precision services extend to defense, medical, automotive, and food and beverage industries, all with consistent process discipline.
To discuss your Pittsburgh, PA, Aerospace Manufacturing needs and request a quote, contact us online or call 573-646-3996.